Uno Shelf | Living Room 550x202

550x202cm shelving unit for storing and displaying decorative objects. 21 essential colors available from the Fantin color chart.

Fantin's UNO LIVING shelving system is enriched by the addition of hanging shelves, allowing any environment to be equipped with unlimited versatility.

Cantilever shelves (single or double cantilever) with a single depth of 30 cm, made of 0.7 mm (0.03") thick sheet metal, folded three times along the accessible sides to prevent accidents; omega-shaped reinforcements are provided at the bottom to increase their load-bearing capacity (UNI 8601/1984 test: level 5 out of 5). The upright housings are further reinforced with a 3 mm (0.12") thick sheet metal support. The extension of the cantilevers is always 25 cm (9.8").

Uprights made of 30 x 30 mm (1.18" x 1.18") metal tube, 1.2 mm (0.05") thick, fitted with plastic end caps. Along the entire length, one side has slots with a pitch of 50 mm (1.97") for variable positioning of the click fasteners and thus of the shelves.

The use of tubular metal, which provides higher performance levels than the more commonly used open-section bars, ensures minimal twisting and bending effects.

Click fasteners made from 2.5mm (0.10") thick pressed sheet metal. These fasteners are anchored to the uprights by two specially designed side fins that fit into the slots in the uprights. The shelves then fit into the top fins of the actual click fasteners. Each click fastener is designed to support 2 consecutive shelves simultaneously, while wrapping and reinforcing the upright to which it is anchored.

Standard single-depth shelves, 30 cm deep, made of 0.7 mm (0.03") thick sheet metal, folded three times along the two side fronts to prevent accidents; omega-shaped reinforcements are provided at the bottom to increase their load capacity (UNI 8601/1984 test: level 5 out of 5).

The four corners of the shelves are further reinforced with a 3 mm (0.12") thick sheet metal support that is designed to accommodate the entire upright; this ensures perfect continuity between two consecutive shelves, without gaps.